The release powder is the highlighter not the primary colorant in the concrete; coloring of the concrete may be achieved by using integral pigments or color hardeners. Which procedure to use should be determined by the final desired effect, conditions at the job site and preference of the designer. Integral colored produces a color through matrix while color hardener is a surface application. The advantage of integral color is that it colors through the thickness of the slab saves time and it makes for a cleaner finishing process.- An indestructible yet durable non-slip urethane topcoat designed to repel chemicals and resist abrasions. Best used as a topcoat after Epoxy Max 100 in clear or colored industrial floors.
- The release powder is the highlighter not the primary colorant in the concrete; coloring of the concrete may be achieved by using integral pigments or color hardeners. Which procedure to use should be determined by the final desired effect, conditions at the job site and preference of the designer. Integral colored produces a color through matrix while color hardener is a surface application. The advantage of integral color is that it colors through the thickness of the slab saves time and it makes for a cleaner finishing process.
- The release powder is the highlighter not the primary colorant in the concrete; coloring of the concrete may be achieved by using integral pigments or color hardeners. Which procedure to use should be determined by the final desired effect, conditions at the job site and preference of the designer. Integral colored produces a color through matrix while color hardener is a surface application. The advantage of integral color is that it colors through the thickness of the slab saves time and it makes for a cleaner finishing process.
- This unique 95% solids, two-component, polyurethane/polyurea hybrid surface restoration grout was developed to resurface damaged concrete and floor imperfections such as air holes, sand aggregate pops, pitting, gouges and scratches. Concrete Surface Restorer This two-component, structural polyurethane/polyurea hybrid was developed to fill/repair concrete floor surface imperfections such as air holes, popouts, surface pitting, scratches and gouges. Hides imperfections and returns concrete floor surfaces to a “like-new” appearance. It’s a rigid structural polymer with a Shore D Hardness of 70-75 and is primarily used for fine grouting and repairing. Perfect for repairing defects smaller than 1⁄2” and perfecting the surface prior to polishing and sealing.
- A two-component, 100% solids, polyurethane/polyurea hybrid crack filler designed for injection into vertical or horizontal cracks in concrete, bricks, and stone. Rapid Setting Crack Filler Hybrid, quick-set, crack filler designed for injection into vertical or horizontal cracks in structural materials including concrete, bricks, and stone. It bonds, repairs and seals cracks, spalls, pop-outs and defects in heavy traffic industrial concrete floors. When cured, Poly-Strong PS 55 is a highly durable rigid structural polymer with a Shore D Hardness of 70-75. Very high adhesive and tensile properties; creates a long-lasting bond to the surface and outlasts many notable competing products. Odorless and non-hazardous. 250mL Single Cartridge
- A two component, 100% solids, rapid setting polymer liquid joint filler system that has a significantly faster set time and extended shave time. Rapid Setting Joint Filler This easy to apply, self-leveling, 100% solids, two component, rapid curing polyurea joint filler is tough and flexible to reduces spalling, chipping, deterioration and cracks in joints with a hardness Shore A 80-81. Designed for 10-15% movement of installed joint width, it is flexible enough to accommodate small slab movement yet strong enough to protect the vertical edges of concrete from spalling under extreme loading. And thanks to its zero VOC and low-odor mixture, this material is tack free in just minutes and can be shaved and returned to service in under an hour.
- A quick drying, high gloss, durable concrete floor coating specially designed to be used over full flake floor systems.
- The release powder is the highlighter not the primary colorant in the concrete; coloring of the concrete may be achieved by using integral pigments or color hardeners. Which procedure to use should be determined by the final desired effect, conditions at the job site and preference of the designer. Integral colored produces a color through matrix while color hardener is a surface application. The advantage of integral color is that it colors through the thickness of the slab saves time and it makes for a cleaner finishing process.
- Restore-A-Seal is a powerful sealer rejuvenator that restores old, faded solvent-based acrylic sealers. It penetrates deep into existing sealer layers to revive color and gloss, improve adhesion to the concrete surface, remove trapped moisture, and help eliminate sealer blushing for a refreshed, like-new appearance. Additional Shipping Charges Apply for Orders to Alaska & Hawaii
- Topical cure and seal for decorative concrete and stamped concrete surfaces. Acts as a curing agent while providing a thin acrylic layer on the surface to protect and preserve your colored or stamped concrete. Additional Shipping Charges Apply for Orders to Alaska & Hawaii
- This cleaner solution is a patented, synthetic concentrate that will effectively profile or etch a concrete substrate without any harmful effects and can be used safely for both interior and exterior applications. 1 gallonAdditional Shipping Charges Apply for Orders to Alaska & Hawaii
Buy 1 Get 1 Free
Buy 1 GhostShield Eco-Etch 1001 and get 1 free!
