Price range: $39.00 through $169.00
Restore-A-Seal is a powerful sealer rejuvenator that restores old, faded solvent-based acrylic sealers. It penetrates deep into existing sealer layers to revive color and gloss, improve adhesion to the concrete surface, remove trapped moisture, and help eliminate sealer blushing for a refreshed, like-new appearance.
Additional Shipping Charges Apply for Orders to Alaska & Hawaii
Restore-A-Seal is a strong blend of key solvents and surfactants designed to quickly emulsify and re-flow old and faded solvent-based acrylic sealers. Thick layers of old sealer with a dingy, dull look can be made fresh again. Restore-A-Seal penetrates down through the deepest layers of sealer to help the acrylics soak back into the concrete substrate, removes trapped moisture, and helps eliminate blushing.
Brand: Duravel
Features:
Restore-A-Seal penetrates down through the deepest layers of sealer to help the acrylics soak back into the concrete substrate, remove trapped moisture and eliminate blushing.
Restore-A-Seal is also used prior to resealing. Some older acrylic sealers can get very hard and brittle after exposure to the elements. Saturating a previously sealed surface with Restore-A-Seal before the new coat is applied softens the existing acrylic, giving the new sealer a stronger bond for better service life.
Advantages:
Coverage:
First Application: 150 – 250 sq ft per gallon
Second Application: 225 – 350 sq ft per gallon
Application:
Use soap and water to thoroughly clean the surface prior to application. Product will work more effectively when applied during the cooler part of the day, allowing a longer dwell time. Apply with a pump-up sprayer resistant to Xylene, or by using a solvent-resistant paint roller. Apply evenly to the surface. Use enough Restore-A-Seal to completely re-wet the existing sealer through to the bottom layer. Agitating the wetted surface with a roller will aid in softening the existing sealer faster. If needed repeat the process after the sealer is hard enough to walk on. Allow the sealer to dry at least 24 hours before returning to foot traffic, and at least 48 hours before heavy traffic.
When used prior to re-sealing wait for the surface to become hard enough to walk on before applying the new coat of sealer. Wait times will vary with temperature. Generally, the application of the new sealer should begin no sooner than 2 hours and no longer than 6 hours after the surface is treated with Restore-A-Seal.
Clean Up:
Clean tools, sprayers, and mixing vessels with Xylene.
For Professional Use Only
Keep Out of Reach of Children and Animals
Highly Flammable liquid and vapor. May be fatal if swallowed and enters airways. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. Suspected of causing cancer. May cause damage to organs through prolonged or repeated exposures.
Keep away from heat, hot surface, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ ventilating equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Do not breathe dust/ fume/ gas/ mist/ vapors/ spray. Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray. Wash hands and arms thoroughly after handling. Do not touch eyes. Use only outdoors or in a well-ventilated area. Wear protective gloves/ protective clothing/ eye protection/ face protection.
IF SWALLOWED: Get emergency medical help immediately. IF ON SKIN: wash with plenty of water and soap. IF ON SKIN (or hair): Take off Immediately all contaminated clothing. Rinse SKIN with water [or shower]. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing. If exposed or concerned, get medical advice. Get medical help if you feel unwell. Do NOT induce vomiting. If skin irritation occurs: Get medical help. If eye irritation persists: Get medical help. Take off immediately all contaminated clothing and wash it before reuse.
In case of fire: Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish.
This product contains chemicals known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
| Size | 1 Gallon, 5 Gallon |
|---|
