Description
Durável DV-30 is a high-performance, 30% solids methyl methacrylate acrylic concrete sealer designed to enhance color and provide a durable, high-gloss finish. Its crystal-clear, UV-resistant, non-yellowing formula delivers excellent protection while improving the appearance of natural concrete, colored concrete, stamped surfaces, and cement-based overlays.
Advanced silane technology promotes strong adhesion to properly prepared concrete and overlay surfaces, improves mar resistance, and helps simplify future recoating. DV-30 combines superior color enhancement, gloss, and long-term durability for demanding residential and commercial concrete applications.
Brand: Duravel
Features:
- Typical Coverage 180-200 sf/gallon
- Solids Content 30% by weight
- Dry Time, Tack Free: 25 to 60 minutes
- Dry Time, Foot Traffic: 24 hours
- Dry Time, Heavy Traffic: 4 to 5 days
- Recoat Interval: 2 to 24 hours
- Application Temperature, Substrate: 40° to 90° F (7 to 32C)
- VOC Content: <600 or <400 g/L
Durável DV-30 uses pure methyl methacrylate acrylics to form a durable, high-gloss protective finish over natural concrete, colored concrete, stamped concrete, and decorative cement overlays. Its 30% solids formula provides strong color enhancement while helping concrete resist damage from sunlight, weather, traffic, deicing salts, abrasion, and many common chemical stains.
Although DV-30 helps limit the penetration of water and other fluids, the cured sealer remains vapor permeable so moisture vapor can move through the concrete. It is an excellent choice for driveways, walkways, patios, porches, balconies, entrances, and other residential or commercial surfaces where a richer gloss and increased surface protection are desired.
Coverage will vary depending on the application method and the porosity of the surface. Typically, one gallon will cover about 180–200 sq. ft. of concrete or overlay. Sealer should always be applied in thin coats to maximize coating strength and durability. For new applications, apply two coats. For clean and reseal applications, one protective coat over an existing compatible sealer may be all that is needed.
DV-30 must be applied over a dry surface. Natural concrete must cure for at least 28 days before application. Cement overlays vary, so they must be dry according to the recommendations in their technical data sheet.
Choose the roller nap based on the surface texture. Use a thicker nap on rough or contoured surfaces to help coat the profile without leaving puddles in low areas.
Use:
- 1/2″ to 3/4″ nap roller on rough or textured surfaces.
- 1/4″ to 3/8″ nap roller on smooth surfaces.
Always apply DV-30 in thin coats to maximize coating strength and durability. DV-30 may be applied directly from the bucket or from a roller tray. For even product distribution and to reduce roller lines, cross-roll the wet surface during application.
When using an airless sprayer, the unit should have a minimum discharge capacity of 0.5 gpm. Use a .015″ to .019″ tip with a 65° fan pattern. For best results, spray consistent passes while maintaining a wet edge. Use a wand extension when needed to keep the spray even, perpendicular to the surface, and within 12 inches of the surface.
Clean tools, sprayers, and mixing vessels with Xylene.
- Natural Concrete and Overlays
- Driveways, Walks, and Patios
- Porches and Balconies
- Commercial and Residential Concrete
DV-30 is vapor permeable, allowing moisture vapor to escape while helping reduce the penetration of water, oils, and other fluids. This makes it a dependable exterior concrete sealer.
- UV-Stable Pure Acrylics
- Superior Bond to Concrete and Overlay
- Protection from Stains and Chemicals
- Resists Salts, Acidic Stains, and Other Damage
