A concrete sealer additive that provides safe slip-fall protection.
Additional Shipping Charges Apply for Orders to Alaska & Hawaii
D-Grip 50 Mesh
$29.00
Description
D-Grip (50 mesh) micronized polymer traction additive provides increased slip-fall protection when added to a range of concrete floor coatings. D-Grip additives mix easily into sealers and coatings and stays suspended with minimal additional stirring.
- 50 Mesh
- Packaging: 30-ounce jar
- Mixes Easily
- Stays Suspended
- Only Slight Loss of Gloss
Coverage: Add up to six volume ounces of D-Grip per gallon of sealer or coating. The entire contents of one container of D-Grip may be added to a five-gallon pail of sealer.
Provides Safe Slip-Fall Protection On:
- Swimming Pool Decks
- Driveways and Sidewalks
- Stamped Concrete
- Patios and Garages
- Other Interior and Exterior Surfaces
Instructions:
- Shake the container before opening. Blend up to six ounces of D-Grip additive per gallon into the topcoat prior to application. In larger volumes, it may be necessary to stir occasionally during application.
- D-Grip additives can be blended in the original sealer container when used in single-component products. Use a drill with a ribbon mixer or equivalent to blend in thoroughly.
- Two-component products should first be mixed for the time recommended on their TDS prior to adding D-Grip. Do not introduce air into the topcoat; blend at a slow speed.
- Using a drill with a cage-style mixer is best for reducing air induction.
- When using a roller pan, roll along the bottom and edges of the roller tray each time. This action will help keep the material in suspension and evenly distributed on the roller nap surface: roll sealer or coating per that product’s TDS instructions. D-Grip additive must be blended thoroughly in the topcoat before application. DO NOT attempt to broadcast D-Grip additive materials.
*For Professional Use Only:
Keep Out of Reach of Children and Animals
May form combustible dust concentrations in the air. These products are micronized powders. Static charges on the powders may ignite flammable atmospheres. High levels of product dust in the atmosphere may present a dust explosion hazard.
IF IN EYES: Immediately flush with copious amounts of water for at least 20 minutes. If eye irritation persists: Get medical advice/ attention. IF SWALLOWED: Immediately call a POISON CONTROL CENTER/ doctor. Do not induce vomiting. Aspiration hazard. Dilute with 1-2 glasses of water. Get medical aid. If vomiting occurs spontaneously, keep head below hips to prevent aspiration of liquid into lungs. IF ON SKIN (or hair): Remove contaminated clothing. Wash skin thoroughly with soap and water. If skin irritation occurs: Get medical advice or attention. IF INHALED: Treat as a nuisance dust. Remove victim to fresh air and provide oxygen if breathing is difficult. Immediate medical attention not normally required. No delayed effects expected. Call a POISON CENTER/doctor if you feel unwell.
