Colour Seal is a premium solvent-based acrylic concrete sealer that enhances and protects concrete and overlay surfaces with a durable, UV-stable colored finish. It provides excellent adhesion, stain and abrasion resistance, chemical protection, and long-lasting performance for driveways, patios, walkways, pool decks, balconies, and other exterior concrete surfaces.
Colour Seal – Tinted Sealer
Price range: $39.00 through $389.00
Description
Colour Seal protects and beautifies concrete and overlay products, while providing stain and abrasion resistance with a long-lasting vapor permeable coating.
Colour Seal acrylic concrete sealer is formulated using the highest performing acrylics on the market with industry leading adhesion strength, resistance to chemicals, and protection from hot tire pick up coupled with resistance to common stains and ice melt products.
Colour Seal is a single component solid color solvent based acrylic concrete sealer for use on both natural concrete and cement overlays.
Benefits:
- UV Stability
- Color Options
- Long Lasting
- Superior Bond and Strength
Primary Application:
- Patios
- Entranceways
- Decks and Balconies
- Driveways and Walkways
- Pool Deck Overlays
Technical Data:
- Solids Content: 30% +/- by weight
- Dry Time, Tack Free: 1 to 2 hours
- Dry Time, Foot Traffic: 24+ hours
- Dry Time, Heavy Traffic: 48 hours
- Dry Time, Vehicular: 4 – 5 Days
- Recoat Interval: 4 to 24 hours
- Application Temperature, Substrate: 50° to 80° F
- VOC Content: < 600 g/L or <400 g/L
Coverage:
First coat: varies with substrate porosity, typically 160 – 200 sq ft per gallon
Second Coat: 180 – 220 sq ft per gallon
Coverage rates will vary greatly depending on surface porosity and application method. First coat may be blotchy and uneven due to the porosity of the substrate. Always apply a second coat for proper color appearance, coverage and protection. In a reseal application one coat should be sufficient if the current color is close to the new one chosen. When changing color, two coats may be needed for proper hide. Colour Seal is designed to be applied in thin coats for proper curing. One thick coat will not be as durable as two thin coats.
Application Instructions:
Colour Seal is to be applied over dry substrates. Natural concrete must cure for at least 28 days prior to application. Cement overlays vary and must be dry per their technical data sheet recommendations. Roller nap thickness is chosen to prevent puddling in low areas; the more contoured the surface being coated, the thicker the roller nap. Apply Colour Seal using a 1/2″ to 3/4″ nap roller on rough or textured surfaces, or 1/4″ to 3/8” nap on smooth surfaces.
Sealer should always be applied with thin coats to maximize coating strength. Colour Seal may be applied directly from the bucket or from a roller tray. For an even dispersion of the product and to minimize roller lines cross roll the wet surface during application.
When using an airless sprayer the unit should have a minimum capacity of 0.5 gpm discharge. Use a .015″ to .019″ tip with 65 deg. fan pattern. For best results, spray consistent passes while maintaining a wet edge. Use a wand extension when needed to maintain and even spray perpendicular to and within 12″ of the surface.
Clean Up:
Clean tools, sprayers, and mixing tools with Xylene
Additional information
| Tint | Medium Grey, Dark Grey, Charcoal, Khaki, Sand Buff, Walnut, Brick Red |
|---|---|
| Size | 1 Quart, 1 Gallon, 5 Gallon |
